The use of Intermol 210 ensures that the injected aluminum parts have a clear and uniform surface, minimizing the formation of waste. The emulsion has excellent stability, even in the presence of hard water.
Concentrated product to be diluted with water in a proportion of approximately 1:20.
Type: Mold Release Agent
Color: White
Specific Gravity: 1.0
Base: Water
Shelf Life: 6 months
Temperature Range: 100°C to 400°C
Requires dilution.
Low residue.
Intermol 210 is a release agent specially designed for the die casting of aluminum alloy parts.
The product should be diluted with water in a ratio of approximately 1:20. The hardness of the water used may influence the surface finish of the injected parts, but does not affect the stability of the emulsion.
It is recommended to cure the mould by applying release agent 3 times before making the first part.
Do not apply in excess. The excess of release agent does not improve the release effect, on the contrary, it can deform the part.
Do not expose to low temperatures, as they break the emulsion and render the product useless.
Intermol 222
Interpasta DC
Pressurized Tanks and Spray Guns.