Intermol 306 is a water-based release agent formulated for rigid, semi-rigid, and flexible polyurethane foams. Its properties can significantly reduce release agent consumption.
Flexible and semi-rigid polyurethane
Low residue
Superior surface quality
Specific Density: 1.0
Shelf life: 12 months
Base: Water
Color: Semi-transparent amber
Temperature Range: 30°C to 200°C
Polyurethane release agent.
Release agent for flexible foam.
Separator for rigid foam.
Foam seat release agent.
Open-cell PU Surface finishing.
Apply a thin, uniform film using appropriate spray equipment. After deep cleaning, the initial coating can be applied with a cloth.
It is recommended to cure the mold by applying the release agent three times before producing the first part.
Do not overapply. Excess release agent does not improve release performance and may deform the part.
Do not expose to low temperatures, as this breaks the emulsion and renders the product unusable.
VERY IMPORTANT: Shake well before use and continue shaking during application.
R 2022.07.01
These technical characteristics are typical of those obtained within the tolerance of normal production and do not constitute a specification. Our R&D team is constantly improving our products. Therefore, Interlub S.A. de C.V. reserves the right to change the technical information in this document without prior notice.
Cleaners
© Intermol, Interlub, Interglass, Interlub Group. All rights reserved.
Privacy policy
Cookie usage policy
English
Spanish